EPP13 C150 HR13: Controlled, pneumatic, hydraulic pulse nutrunner - Atlas Copco Norge

Produktsøk

Be om informasjon [-]

EPP13 C150 HR13: Controlled, pneumatic, hydraulic pulse nutrunner

8431 0380 71

Hurtigkoblinger

Atlas Copco’s Pulsor C System gives you all the advantages of a controlled impulse tool, plus the intelligence of an electric fastening system. Like all Atlas Copco pulse tools, Pulsor C is fast, powerful, light and compact and generates virtually no reaction force. The controller remembers up to 4,000 tightenings that can be stored and analyzed. This enables you to fine-tune your process and ensure that every tightening in every shift is perfect. If they are not perfect, you can see why.


Egenskaper og fordeler

  • No missed screws – Pulsor C counts the tightenings and signals “Batch OK”
  • Forget stripped screws – Pulsor C ensures the screw has been tightened correctly
  • No wrong/forgotten parts – Pulsor C signals “NOK” if the wrong screw or part is used
  • Correct torque every time – Pulsor C controls the torque level
  • Good repeatability – get consistent tightening on hard and soft joints
  • Premature trigger-release warning – LEDs warn operator of interrupted tightening
  • Multiple P-set – one tool can perform up to 100 different P-sets. The right torque setting is selected by exchanging sockets, scanning barcodes and more.
  • High-speed tightening – Atlas Copco pulse tools are fast and powerful, helping to boost productivity.
  • Easy to set up and use.
  • Hot swap – you can change the tool or cable without shutting the system down because the tool shut-off is located in the Tool Control Box instead of the tool. No new settings in the tool are needed.

Tekniske data

Tekniske spesifikasjoner
BoltstørrelseM12-M14 mm
Dreiemomentsområde75 - 150 Nm
Firkantet drivstang12.7 mm
Fri hastighet5300 r/min
Vekt2.6 kg
Lengde193 mm
CS-avstand33.5 mm
Luftforbruk under pålastet drift15 l/s
Anbefalt størrelse på slange330.2 mm
Luftinntaksgjenge0.38 mm
ModelltypePistol
AvstengingYes
Maks. arbeidstrykk7 bar
LydstandardISO15744
Lydusikkerhet3 dB(A)
Lydeffekt98 dB(A)
Lydtrykk87 dB(A)
VibrasjonsstandardISO28927-2
Vibrasjonsverdi3.8 m/s²
Vibrasjonsusikkerhet0.9 m/s²

Tilbehør som følger med dette produktet

  • Suspension yoke

    Suspension yoke

    4250 1365 00

  • Protective cover

    Protective cover

    For EPP13C

    4250 2990 04

  • Trim valve Kit

    Trim valve Kit

    For North American market this is assembled on tool. All other markets as an Icluded accessory.

    4250 1894 82

Produktvisninger


Se produktet i bruk

Tilbehør

  • Suspension yoke

    Suspension yoke

    4250 2720 00

  • Tool cable - Coil, 3 meters

    Tool cable

    Coil, 3 m

    4250 2533 53

  • MultiFlex - Swivelling type, BSP

    MultiFlex

    Swivelling type, BSP

    8202 1350 22

  • Connection kit

    Connection kit

    4250 1854 91

  • Air sensor tuning valve - See, Pulsor manual

    Valve

    See, Pulsor manual

    4080 1340 00

  • Hose kit

    10 m

    8202 1182 15

  • Hose kit

    5 m

    8202 1182 13

  • Tool cable - Spiral, 5 m

    Tool cable

    Spiral, 5 m

    4250 2533 06

  • Tool cable - Spiral, 12 m

    Tool cable

    Spiral, 12 m

    4250 2533 13

  • Tool cable - Straight, 5 m

    Tool cable

    Straight, 5 m

    4250 2533 05

  • Tool cable - Straight, 12 m

    Tool cable

    Straight, 12 m

    4250 2533 12

  • Tool cable - Coil, 5 m

    Tool cable

    Coil, 5 m

    4250 2533 55

  • Tool cable - Coil, 7 m

    Tool cable

    Coil, 7 m

    4250 2533 57