PFD1500RA-2360: Pneumatic Positive Feed Drill - Atlas Copco Norge

Produktsøk

Be om informasjon [-]

PFD1500RA-2360: Pneumatic Positive Feed Drill

8445 1500 14

Hurtigkoblinger

PFD 1500 is a Positive Feed Drill in Right Angle shape which is suitable for drilling critical and close tolerance holes of medium to large diameters. This drill is used all around the aircraft but is particularly useful in stacked materials and in assembly of structural parts such as fuselage, wing box, wing box assembly, pylon, landing gear and rudder. It’s approved for use in all materials typically found in aerospace manufacturing such as titanium, CFRP, aluminum and inconel.


Egenskaper og fordeler

  • Governed air motor for consistent power under load which significantly reduces cycle time
  • Double needle bearings for both feed- and drive gears ensures outstanding service life
  • The modular concept allows quick setup, configuration and maintenance
  • The overload clutch ensures safe operation
  • The small angle head radius allows the tool to be used also in the most cramped locations around the airplane
  • The integrated air logic controls the tool from one easily accessible button set
  • Low air consumption reduces cost for energy

Tekniske data

Tekniske spesifikasjoner
Fri hastighet2360 r/min
Vekt5.4 kg
Luftforbruk ved fri hastighet16 l/s
Avstand fra senter til side17.8 mm
Maks. effekt1.5 kW
Kapasitet, titan15.8 mm
Kapasitet, karbon25.4 mm
LydstandardISO15744
Lydtrykk83 dB(A)
Lydeffekt96 dB(A)
Lydusikkerhet3 dB(A)
Lengde412 mm
Rask fremdriftNo
Aksial4000 N
Luftinntaksgjenge0.5 mm
Bredde56 mm
Høyde139 mm
Anbefalt størrelse på slange0.62 mm
Luftforbruk ved maks. ytelse35 l/s
ZZZ Capacity Aluminium1 inch
ZZZ- delete Capacity steel15.8 mm

Energy Efficiency Audit

EEA
A huge amount of energy is wasted due to leaks in compressed air systems. Capacity losses of up to 20% are common in many installations. During an Energy Efficiency Audit Atlas Copco checks the static and dynamic pressure for your air tools on the line. The pressure drop is measured and documented and a visual inspection of the air installation is performed. Based on the information acquired, using the Energy Efficiency Calculator, Atlas Copco recommends the correct installation in terms of air line accessories and various other aspects.

Read more about Energy efficiency Audit

Preventive Maintenance

Like other machines, Atlas Copco industrial power tools need regular maintenance in order to fulfill their full potential in terms of performance and reliability. Different agreements are available, tailored to your needs. We offer maintenance both on-site or off-site, or a combination.

Read more about Preventive Maintenance



Full Coverage Service

Our Full Coverage option keeps your power tools in top operating condition and gives you a fixed budget for all tool maintenance. Other services can be added. To develop the optimum service program for your specific manufacturing operation, take advantage of our unique ToolScan RCM process.
Full Coverage includes:
  • Repair, including parts
  • Calibration
  • Preventive maintenance program
  • On-site/off-site options
  • Other services can be added
Read more about Full Coverage service



Outsourcing solutions

We have extensive experience of outsourcing solutions and currently have more than 75 on-site workshops. These are examples of the areas we cover:
  • Preventive maintenance, repair and calibration of all
    brands and types of tools.
  • Installation and start-up support.
  • Service management system, including developing Key Performance Indicators.
  • Line and process support.
  • Back-up tool/equipment and spare parts management.
  • Other customer requests.
Read more about Outsourcing Solutions